Shaanxi Fast 4 Speed Energy Powertrain Transmission
FAST Speed 4 Energy mahle Powertrain Transmission series is shaanxi method and ford motor drive group for pure electric vehicles dedicated research and development of the Transmission assembly, the series of input torque for 500 N.m to 3000 N.m five, With four gears, mainly used in 6-12 meter passenger cars and 7T-15T light trucks, medium trucks, sanitation truck; The series transmission design is novel, using a single box structure, full sliding sleeve shift, simple structure, high reliability, long service life. Transmission speed ratio configuration is reasonable, the use of fine and high tooth design, gear meshing smooth, transmission noise is low, clear gear, flexible shift, a variety of control forms, can use electric, pneumatic structure. Advanced production technology. The processing of each part of the transmission has the international advanced machine tools (mainly numerical control, machining center), heat treatment equipment (IPSEN continuous furnace and Aixelin box furnace) as the guarantee, the production of important parts in the special production line.
Advantages of 4 Speed EV
1. Adopt special sliding sleeve, cancel synchronizer structure, greatly reduce transmission assembly failure.
2. The pneumatic gear shifting actuator adopts the direct shift mode, the shift time is less than 0.6s, and the shift is smoother. It has been through more than 30 million consecutive bench experiments, with high reliability and fully meeting the life cycle.
3. Effectively improve the driving range of the vehicle, extending the driving journey by more than 20% (compared with direct drive).
4. The system has high transmission efficiency, advanced control technology and wide range of vehicle application.
Fast 4 Speed Energy Powertrain Tranmisssion
This is the list of all series of Fast 4 Speed Energy Powertrain Tranmisssion.
Fast EV60-4E50 EV Transmission
Input Torque:2004 N.m
Maximum Speed:4500 RPM
Length:738x436x436 mm
Weight Iron/Al Alloy:140 Kg
Speed Ratio:4.008-1.000
Fast EV60-4E50-1 EV Transmission
Input Torque:1442 N.m
Maximum Speed:4500 RPM
Length:777x430x426 mm
Weight Iron/Al Alloy:111 Kg
Speed Ratio:4.008-1.000
Fast EV110-4E50-B EV Transmission
Input Torque:7704 N.m
Maximum Speed:8000 RPM
Length:1047x478x493 mm
Weight Iron/Al Alloy:245 Kg
Speed Ratio:15.409-2.298
Fast EV105-4E120 EV Transmission
Input Torque:6706 N.m
Maximum Speed:4000 RPM
Length:1041X520X831 mm
Weight Iron/Al Alloy:488 Kg
Speed Ratio:6.706-1.000
Fast EV100-4E150 EV Transmission
Input Torque:6199 N.m
Maximum Speed:2700 RPM
Length:1107x680x536 mm
Weight Iron/Al Alloy:600 Kg
Speed Ratio:4.133-1.000
Fast EV430-4E280 EV Transmission
Input Torque:25477 N.m
Maximum Speed:3500 RPM
Length:1758X618X669 mm
Weight Iron/Al Alloy:898 Kg
Speed Ratio:9.099-1.000
Fast EV430-4E300 EV Transmission
Input Torque:19524 N.m
Maximum Speed:3500 RPM
Length:1758X618X669 mm
Weight Iron/Al Alloy:893 Kg
Speed Ratio:9.099-1.000