Fast 12JZSDX240 AMT Transmission
FAST 12JZSDX240 is Twin Countershaft AMT transmission has 12 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With double intermediate shaft structure design and integrated with a synchronizer, the Maximum input speed is 2600 RPM. The length of the 12JZSDX240 transmission is 984.48 mm. The 12JZSDX240 gearbox has 12 different gears, and the reduction ratio of each gear is different. The 1st gear reduction ratio is 15.527, 2nd gear reduction ratio is 12.072, 3rd gear reduction ratio is 9.386, 4th gear reduction ratio is 7.330, 5th gear reduction ratio is 5.726, 6th gear reduction ratio is 4.462, 7th gear reduction ratio is 3.480, The 8th gear reduction ratio is 2.706, the 9th gear reduction ratio is 2.104, the 10th gear reduction ratio is 1.643, 11th gear reduction ratio is 1.284, 12th gear reduction ratio is 1.000, and the reverse gear 1 ratio is 14.852.
FAST 12-speed AMT series transmission have different models, with code J in the model name means mechanical transmission, with code Z in the model name indicates that the transmission is an automatic transmission, with code D in the model name means standard transmission, with code S in the model name means transmission with Double Intermediate Shaft design.
F·SHIFT is an AMT automatic transmission system designed by Fast Company using the OptiDrive modular system of WABCO Company. It not only adopts the technical advantages of Fast double countershaft transmission, but also adopts the advanced and mature control system and actuator of WABCO.
Advantages of Fast 12JZSDX240 AMT Transmission
It is synchronized with CMI’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
Technical Specifications
Basic Introduction of Shaanxi Fast 12JZSDX240 AMT
| Transmission Model: | 12JZSDX240 |
| Transmission Application: | Automated Manual Transmission |
| Input Torque: | 2400 N.m |
| Maximum Speed: | 2600 RPM |
| Installation length: | 984.48 mm |
| Weight Iron/Al Alloy: | 300 Kg |
| Fuel Quantity: | 16.5 L |
| Speed Ratio: | 15.527-1.000 |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
DuraMac
DCEC ISL8.9 series automotive engine is four-strokes engine with 114 mm bore and 145 mm stroke, Equipped with Bosch (or BYC or Weifu) pump. engine comes with turbocharger and Air- Air intercooler. The prime power range is from 270 HP to 400 HP.
Fast Gear
The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.
EV Truck
Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.
DANA Axle
Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.
Datong Gear
The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.
Crane Trucks
The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.
All Wheel Drive Off-road Chassis
Dongfeng Special Vehicle's all-wheel-drive off-road chassis series, developed based on military technology platforms, supports 4×4/6×6 drive configurations and delivers exceptional cross-country capability, high reliability, and strong environmental adaptability. DuraMac provides customized off-road solutions, with products widely applied in high-altitude rescue, wilderness exploration, special transport, and military applications, meeting the demands of both domestic and international specialty vehicle markets.
Medium & Heavy-duty Truck
DuraMac offers a full range of Dongfeng solutions for medium-to-heavy-duty trucks, covering diesel, pure electric, and hydrogen fuel cell powertrains. Its pure electric trucks feature high-energy-density batteries and electric drive systems with dual-gun fast charging capability, ensuring high operational efficiency. Hydrogen-powered heavy-duty trucks are equipped with an intelligent VCU control system and offer multiple power variants. All products utilize high-strength chassis and IP68-rated electrical systems, meeting diverse operational demands across engineering transport, port logistics, and urban distribution.
Transmission Model | Max. Input Torque | Max. Input Power | Rated Speed |
| 10JZSD120 | 1200 N.m | 2600 RPM | 275 Kg |
| 10JZSD160 | 1600 N.m | 2600 RPM | 285 Kg |
| 10JZSD160A | 1600 N.m | 2600 RPM | 285 Kg |
| 12JZSD160/180 | 1600/1800 N.m | 2600 RPM | 290 Kg |
| 12JZSDX240 | 2400 N.m | 2600 RPM | 300 Kg |
| 12JZSD240A | 2400 N.m | 2600 RPM | 300 Kg |
| 16JZSD200/240 | 2000/2400 N.m | 2600 RPM | 300 Kg |
| 16JZSD200A/240A | 2000/2400 N.m | 2600 RPM | 300 Kg |
| ——END—— | |||
Shaanxi Fast 12JZSDX240 AMT-Automatic Manual Transmission Data Sheet | |||||
| Model | 12JZSDX240 | Input Torque（N.m） | 2400 | ||
| Maximum Speed（RPM） | 2600 | Length（mm） | 984.48 | ||
| Weight Iron/Al Alloy (Kg) | 300 | Oil (L) Tol. ±4% | 16.5 | ||
Speed Ratio of Shaanxi Fast 12JZSDX240 AMT-Automatic Manual Transmission | |||||
| 1st Gear | 15.527 | 2nd Gear | 12.072 | 3rd Gear | 9.385 |
| 4th Gear | 7.329 | 5th Gear | 5.726 | 6th Gear | 4.461 |
| 7th Gear | 3.48 | 8th Gear | 2.705 | 9th Gear | 2.103 |
| 10th Gear | 1.642 | 11th Gear | 1.283 | 12th Gear | 1 |
| R1 | 14.852 | R2 | / | ||
| ——END—— | |||||
Scopes of Supply of Shaanxi Fast 12JZSDX240 Automated Manual Transmission | |||||
| 1. Electrical Shifting Systerm | 2. TCU clutch control unit | 3. Speed sensor | |||
| 4. Distance Sensor | 5. Temperature Sensor | 6. Preesure Sensor | |||
| 7. Main Box | 8. Auxiliary Box | 9. Gearbox Housing | |||
| 10. Countershaft Braker | 11. Braker Solenoid Valve | ||||
| ——END—— | |||||
Optional Accessories of Shaanxi Fast 12JZSDX240 Automated Manual Transmission | |||||
| 1. Shift Handle | 2. Clutch Assembly | 3. Release Bearing Assembly | |||
| 4. Power Takeoff | |||||
| ——END—— | |||||
Modifiable Components of Shaanxi Fast 12JZSDX240 Automated Manual Transmission | |||||
| 1. Helical Teeth | 2. Straight Teeth | 3. Lubricating Oil Pump | |||
| 4. Triple Cone Synchronizer | 5. Smoothing | 6. Gear Shot Blasting | |||
| ——END—— | |||||
Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
