Select Page

Fast 6J76TD MT

FAST 6J76TD transmission has 6 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With mechanical structure design and integrated with a synchronizer, and the maximum input speed is 2600 RPM. The length of the 6J76TD transmission is 714 mm. The 6J76TD manual transmission has 6 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 5.942, the 2nd gear reduction ratio is 3.398, the 3rd gear reduction ratio is 2.027, the 4th gear reduction ratio is 1.275, the 5th gear reduction ratio is 1.000, the 6th gear reduction ratio is 0.798, and the reverse gear ratio is 5.850. The input torque range of the 6J76TD manual transmission is 760 N.m.

FAST 6-speed MT series transmission have different models, with code J in the model name means mechanical transmission, with code T in the model name means transmission integrated with synchronizer. with code A in the model name means transmission top gear is overdrive.

EMAC is the official exporting agent of Fast Group (joint venture of CAT AT transmission), Dongfeng-Dana Axle (Dongfeng and Dana joint venture), Komman air suspension (Leading brand in China in air suspension business line), by integrated all this leading.

Advantages of Fast 6J76TD MT

1. It is synchronized with CMI’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
2. The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
3. The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
4. Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
5. The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.

Technical Specifications

Basic Introduction of Shaanxi Fast 6J76TD MT

Transmission Model: 6J76TD
Transmission Application: Manual Transmission
Input Torque: 760 N.m
Maximum Speed: 2600 RPM
Installation length: 714 mm
Weight Iron/Al Alloy: 195 Kg
Fuel Quantity: 7.5 L
Speed Ratio: 5.942-0.798
Lead Time: 15-30 Working Days
Payment Terms: T/T ,L/C
The picture of Performance Curve-DCEC Cummins Industrial Engine

Shaanxi Fast 6J76TD MT-Manual Transmission Data Sheet

Model 6J76TD Input TorqueN.m 760
Maximum SpeedRPM 2600 Lengthmm 714
Weight Iron/Al Alloy (Kg) 195 Oil (L) Tol. ±5% 7.5

Speed Ratio of Shaanxi Fast 6J76TD MT-Manual Transmission

1st Gear 5.941 2nd Gear 3.397 3rd Gear 2.026
4th Gear 1.274 5th Gear 1 6th Gear 0.798
R1 5.850 R2 /

Scopes of Supply of Shaanxi Fast Gear 6J76TD Manual Transmission

Air Intake System 1.  Air Intake Manifold Starting System 1.  Starter Motor
2.  Inter-Cooler 2.  Starter Rely
Exhuast System 1.  Exhuast Manifold Fuel System 1.  Fuel Transfer Pump
2.  Turbocharger 2.  High-Pressure Fuel Pump
3.  Exhuast Elbow 3.  Fuel Filter
Charging System 1.  Charging Alternator Engine Shut-Down System 1.  Engine Fuel Shut-Off Solenoid
Cooling System 1.  Water Pump Lubricating System 1.  Oil Pump
2.  Engine Fan 2.  Oil Filter
3.  Standard Radiator 3. N/A
Power Output System 1. Flywheel Engine Auiliary Accessories 1. Air Compressor
2. Standard Flywheel Housing 2. Power Steering Pump
Engine Mounting System 1.  Engine Mouting Bracket

Optional Accessories of Shaanxi Fast Gear 6J76TD Manual Transmission

1. Clutch Housing 2. Releasing Device Assembly 3. Power Take-Off
4. Water Cooling Device 5. Air Cooling and Emergency Steering Assistance 6. Coupler Booster
7. Shift Booster 8. Gear Selection Booster

Modifiable Components  of Shaanxi Fast Gear 6J76TD Manual Transmission

1. Helical Teeth 2. Straight Teeth 3. Lubricating Oil Pump
4. Gear Shot Blasting 5. Smoothing

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team

Automotive Sales - Mr. Wells Luo

Sales Director - Mr. Jasper Lee      

Service Team

Customer Service - Mrs. Wendy Fu

Ventas españolas - Victoria

Contact EMAC Now!

3 + 13 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest