Select Page

Fast F5J80TC MT

FAST F5J80TC transmission has 5 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With single intermediate shaft structure design and integrated with a synchronizer, and the maximum input speed is 2600 RPM. The length of the F5J80TC transmission is 709 mm.

The F5J80TC manual transmission has 5 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 4.976, the 2nd gear reduction ratio is 2.520, the 3rd gear reduction ratio is 1.538, the 4th gear reduction ratio is 1.000, the 5th gear reduction ratio is 0.800, and the reverse gear 1 is 4.812. The input torque of the F5J80TC manual transmission is 800 N.m. The F5J80TC manual transmission weighs 190 Kg.

FAST 5-speed MT series transmission have different models, with code D in the model’s name means standard transmission, the code -B in the model’s name means the improved, with code S in the model’s name means transmission with Double Intermediate Shaft design, with code T in the model’s name means transmission integrated with synchronizer.

Based on the international well-known engines that produced in China, EMAC integrated world-leading powertrain system products, and developed our own powertrain system brand-DuraMac.

1. There are various matching forms and a wide range of speed ratios, which are suitable for various road surfaces. Small size and light weight. The left/right power take-off can be matched as required, and the parking brake interface is reserved.
2. Long service life, 1/2 gear adopts double-cone synchronizer, 3/4 gear, 5th gear adopts single-cone synchronizer, and the friction pair of the synchronizer adopts high-performance friction material, which has a long service life.
3. High transmission efficiency, using the world’s most advanced manufacturing equipment to ensure the precision of gear manufacturing, high transmission efficiency, fuel saving and high efficiency.
4. The shifting is light, the short-stroke synchronizer is adopted, the operating mechanism is optimized, and the counterweight design assists in completing the shifting, and the shifting force of the third gear minus the second gear is significantly lower than that of competitive products.
5. The speed ratio steps are arranged reasonably and the fuel economy is good.

Technical Specifications

Basic Introduction of Shaanxi Fast F5J80TC MT

Transmission Model: F5J80TC
Transmission Application: Manual Transmission
Input Torque: 800 N.m
Maximum Speed: 2600 RPM
Installation length: 709 mm
Weight Iron/Al Alloy: 190 Kg
Fuel Quantity: 10.5 L
Speed Ratio: 4.976-0.800
Lead Time: 15-30 Working Days
Payment Terms: T/T ,L/C
The picture of Performance Curve-DCEC Cummins Industrial Engine

Shaanxi Fast F5J80TC MT-Manual Transmission Data Sheet

Model F5J80TC Input Torque(N.m) 800
Maximum Speed(RPM) 2600 Length(mm) 709
Weight Iron/Al Alloy (Kg) 190 Oil (L) Tol. ±5% 10.5

Speed Ratio of Shaanxi Fast F5J80TC MT-Manual Transmission

1st Gear 4.976 2nd Gear 2.52 3rd Gear 1.538
4th Gear 1 5th Gear 0.8 6th Gear  
R1 4.812 R2 /

Scopes of Supply of Shaanxi Fast Gear F5J80TC Manual Transmission

Air Intake System 1.  Air Intake Manifold Starting System 1.  Starter Motor
2.  Inter-Cooler 2.  Starter Rely
Exhuast System 1.  Exhuast Manifold Fuel System 1.  Fuel Transfer Pump
2.  Turbocharger 2.  High-Pressure Fuel Pump
3.  Exhuast Elbow 3.  Fuel Filter
Charging System 1.  Charging Alternator Engine Shut-Down System 1.  Engine Fuel Shut-Off Solenoid
Cooling System 1.  Water Pump Lubricating System 1.  Oil Pump
2.  Engine Fan 2.  Oil Filter
3.  Standard Radiator 3. N/A
Power Output System 1. Flywheel Engine Auiliary Accessories 1. Air Compressor
2. Standard Flywheel Housing 2. Power Steering Pump
Engine Mounting System 1.  Engine Mouting Bracket

Optional Accessories of Shaanxi Fast Gear F5J80TC Manual Transmission

1. Clutch Housing 2. Releasing Device Assembly 3. Power Take-Off
4. Twin Cone Synchronizer 5. Water Cooling Device 6. Air Cooling and Emergency Steering Assistance
7. Coupler Booster 8. Shift Booster 9. Gear Selection Booster

Modifiable Components  of Shaanxi Fast Gear F5J80TC Manual Transmission

1. Helical Teeth 2. Straight Teeth 3. Lubricating Oil Pump
4. Gear Shot Blasting 5. Smoothing

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team

Automotive Sales - Mr. Wells Luo

Sales Director - Mr. Jasper Lee      

Service Team

Customer Service - Mrs. Wendy Fu

Ventas españolas - Victoria

Contact EMAC Now!

14 + 1 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest