Fast F8JZ130AM AMT Transmission
FAST F8JZ130AM is LD & MD Truck AMT series transmission has 8 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With double intermediate shaft structure design and integrated with a synchronizer, and the Maximum input speed is 2600 RPM. The length of the F8JZ130AM transmission is 839.3 mm. The F8JZ130AM manual transmission has 8 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 8.088, the 2nd gear reduction ratio is 5.664, the 3rd gear reduction ratio is 3.958, the 4th gear reduction ratio is 2.861, the 5th gear reduction ratio is 2.030, the 6th gear reduction ratio is 1.421, the 7th gear reduction ratio is 1.000, the 8th gear reduction ratio is 0.718, and the reverse gear 1 ratio is 8.264, and the reverse gear 2 ratio is 2.070. The F8JZ130AM manual transmission has an input torque range of 1300 N.m.
FAST 8-speed AMT series transmission have different models, with code D in the model name means standard transmission, with code S in the model name means transmission with Double Intermediate Shaft design, with code X in the model name means auxiliary transmissions adopt helical gears, with code L in the model name indicates that the transmission is made of aluminum alloy.
Fast light truck AMT electro-pneumatic actuator has been developed since 2016. The clutch disengagement, engagement and all gear selection operations are automatically controlled by the electronic control system and performed by the pneumatic system. At present, it has been matched with various products of new energy and light truck AMT.
Advantages of Fast F8JZ130AM AMT Transmission
It is synchronized with CMI’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
Technical Specifications
Basic Introduction of Shaanxi Fast F8JZ130AM AMT
| Transmission Model: | F8JZ130AM |
| Transmission Application: | Automated Manual Transmission |
| Input Torque: | 1300 N.m |
| Maximum Speed: | 2600 RPM |
| Installation length: | 839.3 mm |
| Weight Iron/Al Alloy: | 165 Kg |
| Fuel Quantity: | 7.5 L |
| Speed Ratio: | 8.088-0.718 |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
DuraMac
DCEC ISL8.9 series automotive engine is four-strokes engine with 114 mm bore and 145 mm stroke, Equipped with Bosch (or BYC or Weifu) pump. engine comes with turbocharger and Air- Air intercooler. The prime power range is from 270 HP to 400 HP.
Fast Gear
The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.
EV Truck
Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.
DANA Axle
Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.
Datong Gear
The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.
Crane Trucks
The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.
All Wheel Drive Off-road Chassis
Dongfeng Special Vehicle's all-wheel-drive off-road chassis series, developed based on military technology platforms, supports 4×4/6×6 drive configurations and delivers exceptional cross-country capability, high reliability, and strong environmental adaptability. DuraMac provides customized off-road solutions, with products widely applied in high-altitude rescue, wilderness exploration, special transport, and military applications, meeting the demands of both domestic and international specialty vehicle markets.
Medium & Heavy-duty Truck
DuraMac offers a full range of Dongfeng solutions for medium-to-heavy-duty trucks, covering diesel, pure electric, and hydrogen fuel cell powertrains. Its pure electric trucks feature high-energy-density batteries and electric drive systems with dual-gun fast charging capability, ensuring high operational efficiency. Hydrogen-powered heavy-duty trucks are equipped with an intelligent VCU control system and offer multiple power variants. All products utilize high-strength chassis and IP68-rated electrical systems, meeting diverse operational demands across engineering transport, port logistics, and urban distribution.
Shaanxi Fast F8JZ130AM AMT-Automatic Manual Transmission Data Sheet | |||||
| Model | F8JZ130AM | Input Torque（N.m） | 1300 | ||
| Maximum Speed（RPM） | 2600 | Length（mm） | 839.3 | ||
| Weight Iron/Al Alloy (Kg) | 165 | Oil (L) Tol. ±4% | 7.5 | ||
Speed Ratio of Shaanxi Fast F8JZ130AM AMT-Automatic Manual Transmission | |||||
| 1st Gear | 8.088 | 2nd Gear | 5.664 | 3rd Gear | 3.985 |
| 4th Gear | 2.861 | 5th Gear | 2.03 | 6th Gear | 1.421 |
| 7th Gear | 1 | 8th Gear | 0.718 | 9th Gear | / |
| R1 | 8.246 | R2 | 2.07 | ||
| ——END—— | |||||
Scopes of Supply of Shaanxi Fast F8JZ130AM Automated Manual Transmission | |||||
| 1. Electrical Shifting Systerm | 2. TCU clutch control unit | 3. Speed sensor | |||
| 4. Distance Sensor | 5. Temperature Sensor | 6. Preesure Sensor | |||
| 7. Main Box | 8. Auxiliary Box | 9. Gearbox Housing | |||
| 10. Countershaft Braker | 11. Braker Solenoid Valve | ||||
| ——END—— | |||||
Optional Accessories of Shaanxi Fast F8JZ130AM Automated Manual Transmission | |||||
| 1. Shift Handle | 2. Clutch Assembly | 3. Power Takeoff | |||
| 4. Hydraulic Retarder | |||||
| ——END—— | |||||
Modifiable Components of Shaanxi Fast F8JZ130AM Automated Manual Transmission | |||||
| 1. Helical Teeth | 2. Straight Teeth | 3. Lubricating Oil Pump | |||
| 4. Smoothing | 5. Gear Shot Blasting | ||||
| ——END—— | |||||
Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
