Select Page

Fast Transmission Models

Shaanxi Fast Automobile Transmission Group Co., LTD., founded in 1968, has more than 10 subsidiaries controlled and shareholding. It is the world’s largest commercial vehicle transmission production base and the world’s high-quality automobile transmission system supplier. The company has an annual production capacity of 1.2 million transmissions, 50 million gears and 200,000 tons of castings and forgings. Its products are widely exported to more than 10 countries and regions in North America, Northeast Asia, Southeast Asia, Eastern Europe, South America, the Middle East and so on. It has been awarded the honorary titles of “National May 1 Labor Certificate”, “National Top Ten Typical State-owned Enterprises”, “National Model Employee Home”, “National Civilized Unit”, “Best Practice Enterprise of National Enterprise Culture Construction”, “National Model Enterprise with Harmonious Labor Relations”, “National Advanced Grassroots Party Organization” and so on.

DuraMac

DCEC ISL8.9 series automotive engine is four-strokes engine with 114 mm bore and 145 mm stroke, Equipped with Bosch (or BYC or Weifu) pump. engine comes with turbocharger and Air- Air intercooler. The prime power range is from 270 HP to 400 HP.

FIND MORE

Fast Gear

The F6A Series Automated Transmission uses the FAST automatic transmission, has six front gears, the transmission ratio step arrangement is reasonable, has very outstanding fuel economy. Adopt hydraulic automatic transmission. The F6A Series Automated Transmission has six gears, each with a different reduction ratio.

FIND MORE

EV Truck

Electric wheel dump trucks use electricity as a power source, completely abandoning traditional fuel engines. This change enables the vehicle to achieve true “zero emissions” during operation, without the emission of pollutants such as carbon monoxide, nitrogen oxides, and particulate matter in the exhaust gas, greatly reducing the pollution to the atmospheric environment.

FIND MORE

DANA Axle

Applying the advanced technology of DANA with high efficiency, fuel economy, strong load torque, low noise,high reliability, lower procurement cost, low repair cost and lower maintenance cost.

FIND MORE

Datong Gear

The Datong HW25712XSJ Heavy Manual No-Sync Gearbox has a torque of 2500 N.m, a gear ratio range of 14.941-1, an oil capacity of 13 L (13.5 L when equipped with a power take-off), an overall length of 993 mm, and a weight of 428 kg.

FIND MORE

Crane Trucks

The DFZ5258JSQSZ6D truck crane is a powerful and versatile vehicle designed for efficient lifting and transportation tasks. Equipped with a YCS06300-61 engine and a Shaanxi Auto Fast gear : 10JS120TA high-low gear with synchronizer、PTO gearbox, it provides strong and stable power for demanding operations.

FIND MORE

All Wheel Drive Off-road Chassis

Dongfeng Special Vehicle's all-wheel-drive off-road chassis series, developed based on military technology platforms, supports 4×4/6×6 drive configurations and delivers exceptional cross-country capability, high reliability, and strong environmental adaptability. DuraMac provides customized off-road solutions, with products widely applied in high-altitude rescue, wilderness exploration, special transport, and military applications, meeting the demands of both domestic and international specialty vehicle markets.

FIND MORE

Medium & Heavy-duty Truck

DuraMac offers a full range of Dongfeng solutions for medium-to-heavy-duty trucks, covering diesel, pure electric, and hydrogen fuel cell powertrains. Its pure electric trucks feature high-energy-density batteries and electric drive systems with dual-gun fast charging capability, ensuring high operational efficiency. Hydrogen-powered heavy-duty trucks are equipped with an intelligent VCU control system and offer multiple power variants. All products utilize high-strength chassis and IP68-rated electrical systems, meeting diverse operational demands across engineering transport, port logistics, and urban distribution.

FIND MORE

Fast Transmission

Quickly browse relevant product information

MT Transmission

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Fast 6DS95T MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:6.396- 0.728

Fast 6DS95TB MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:5.924- 0.759

Fast 6DS95TC MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:6.396- 0.728

Fast 6DSX95T MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:6.642- 0.754

Fast 6DSX95TB MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:5.924- 0.759

Fast 6DSX95TC MT

Input Torque:950 N.m
Maximum Speed:2600 RPM
Length:723 mm
Weight Iron/Al Alloy:200 Kg
Speed Ratio:6.396- 0.726

Fast 6DS100T MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.710- 0.770

Fast 6DS100TA MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:8.712- 1

Fast 6DS100TB MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:5.952- 0.760

Fast 6DS100TC MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:7.416- 0.828

Fast 6DS100TD MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.364- 0.677

Fast 6DS100TE MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.385- 0.733

Fast 6DS100TF MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:7.057- 0.788

Fast 6DS100TG MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.952- 1

Fast 6DSX100T/130T MT

Input Torque:1000/1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.699- 0.773

Fast 6DSX100TE/130TE MT

Input Torque:1000/1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.364- 0.734

Fast 6DSX100TF MT

Input Torque:1000 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.364- 0.677

Fast 6DS130T MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.710- 0.770

Fast 6DS130TA MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:8.712- 1

Fast 6DS130TB MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:5.952- 0.760

Fast 6DS130TC MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:7.416- 0.828

Fast 6DS130TD MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.952- 1

Fast 6DS130TE MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:6.385- 0.733

Fast 6DS130TF MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:782 mm
Weight Iron/Al Alloy:255 Kg
Speed Ratio:7.057- 0.788

Fast 6DS150T MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Fast 6DS150TA MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:8.430- 1

Fast 6DS150TB MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.808- 0.808

Fast 6DS150TC MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS150TD MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 1

Fast 6DS150TE MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.663

Fast 6DSX150T MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Fast 6DSX150TB MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.808- 0.808

Fast 6DSX150TC MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS180T MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Fast 6DS180TA MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:8.430- 1

Fast 6DS180TB MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.808- 0.808

Fast 6DS180TC MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS180TC MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS180TD MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 1

Fast 6DS180TE MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.663

Fast 6DSX180T MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Fast 6DSX180TB MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.808- 0.808

Fast 6DSX180TC MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS200T MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Fast 6DS200TA MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:8.430- 1

Fast 6DS200TB MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.808-0.808

Fast 6DS200TC MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.751

Fast 6DS200TD MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 1

Fast 6DS200TE MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:6.335- 0.663

Fast 6DSX200T MT

Input Torque:2000 N.m
Maximum Speed:2600 RPM
Length:783 mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:7.038- 0.737

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Fast 8JS130TA-B MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:821.3 mm
Weight Iron/Al Alloy:280 Kg
Speed Ratio:8.117-0.791

Fast 8JS180T-B MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:858.4 mm
Weight Iron/Al Alloy:300 Kg
Speed Ratio:10.307-1

Fast 8JS180TA-B MT

Input Torque:1800 N.m
Maximum Speed:2600 RPM
Length:858.4 mm
Weight Iron/Al Alloy:300 Kg
Speed Ratio:8.117-0.791

Fast 8DS240A MT

Input Torque:2400 N.m
Maximum Speed:2600 RPM
Length:1102.8 mm
Weight Iron/Al Alloy:490 Kg
Speed Ratio:8.154-0.757

Fast 8DS240B MT

Input Torque:2400 N.m
Maximum Speed:2600 RPM
Length:1102.8 mm
Weight Iron/Al Alloy:490 Kg
Speed Ratio:8.154-0.757

Fast 8DS260 MT

Input Torque:2600 N.m
Maximum Speed:2600 RPM
Length:1102.8 mm
Weight Iron/Al Alloy:490 Kg
Speed Ratio:6.731-0.625

Fast 8DS260A MT

Input Torque:2600 N.m
Maximum Speed:2600 RPM
Length:1102.8 mm
Weight Iron/Al Alloy:490 Kg
Speed Ratio:6.731-0.753

Fast 8DSS330 MT

Input Torque:3300 N.m
Maximum Speed:2600 RPM
Length:1225.7 mm
Weight Iron/Al Alloy:873 Kg
Speed Ratio:8.464-0.713

Fast 8JS130TC MT

Input Torque:1300 N.m
Maximum Speed:2600 RPM
Length:821.3 mm
Weight Iron/Al Alloy:166 Kg
Speed Ratio:10.054-1

8JS85T Manual Transmission

8JS85T Manual Transmission

Input Torque:850 N.m
Maximum Speed:2600 RPM
Length:737.3 mm
Weight Iron/Al Alloy:190 Kg
Speed Ratio:8.122-1

Fast RT-11609A MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:12.650-1

Fast RTD-11509C MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:12.441-1

Fast RTD-11609A MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:12.650-1

Fast RTO-11509F MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:10.055-0.788

Fast RTO-11509FJ MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:300 Kg
Speed Ratio:10.175-0.788

Fast RTO-11609B MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:12.656-0.730

Fast RTO-11609E MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:270 Kg
Speed Ratio:10.686-0.789

Fast RTOD-11509F MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:10.069-0.788

Fast RTOD-11609E MT

Input Torque:1500 N.m
Maximum Speed:2600 RPM
Length:821.3mm
Weight Iron/Al Alloy:285 Kg
Speed Ratio:10.686-0.789

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

AMT Transmission

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Hydraulic Retarder

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

FAST-Reducer

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

FAST-Eaton Clutch

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

FAST-CAT AT Transsmison

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

FAST-Haldex Air Disc Braker

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

EV PowerTrain

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Products Not Available

The relevant products still under developing or waiting to be update, please contact our sales team for latest updates.

Global Activity

WhatsApp-Online-logo

Online Service


Sales Director-Mr.Jasper Lee

Sales Manager-Mrs.Wendy Fu

Spare Parts Sales-Miss. Nora Cao

After-Sales Manager-Miss. Tina Zhang

Merchandiser-Miss. Yoyo Tao

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from fast-gear.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest