Select Page

Fast F5J80TA MT

FAST F5J80TA transmission has 5 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With single intermediate shaft structure design and integrated with a synchronizer, and the Maximum input speed is 2600 RPM. The length of the F5J80TA transmission is 709 mm.

The F5J80TA manual transmission has 5 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 6.217, the 2nd gear reduction ratio is 3.149, the 3rd gear reduction ratio is 1.752, the 4th gear reduction ratio is 1.000, the 5th gear reduction ratio is 0.789, and the reverse gear 1 is 6.012. The input torque of the F5J80TA manual transmission is 800 N.m. The F5J80TA manual transmission weighs 190 kg.

FAST 5-speed MT series transmission have different models, with code D in the model’s name means standard transmission, the code -B in the model’s name means the improved, with code S in the model’s name means transmission with Double Intermediate Shaft design, with code T in the model’s name means transmission integrated with synchronizer.

Based on the international well-known engines that produced in China, EMAC integrated world-leading powertrain system products, and developed our own powertrain system brand-DuraMac.

Advantages of Fast F5J80TA MT

  • There are various matching forms and a wide range of speed ratios, which are suitable for various road surfaces. Small size and light weight. The left/right power take-off can be matched as required, and the parking brake interface is reserved.

  • The speed ratio steps are arranged reasonably and the fuel economy is good.

  • High transmission efficiency, using the world’s most advanced manufacturing equipment to ensure the precision of gear manufacturing, high transmission efficiency, fuel saving and high efficiency.

  • The shifting is light, the short-stroke synchronizer is adopted, the operating mechanism is optimized, and the counterweight design assists in completing the shifting, and the shifting force of the third gear minus the second gear is significantly lower than that of competitive products.

  • Long service life, 1/2 gear adopts double-cone synchronizer, 3/4 gear, 5th gear adopts single-cone synchronizer, and the friction pair of the synchronizer adopts high-performance friction material, which has a long service life.

Technical Specifications

Basic Introduction of Shaanxi Fast F5J80TA MT

Transmission Model:F5J80TA
Transmission Application:Manual Transmission
Input Torque:800 N.m
Maximum Speed:2600 RPM
Installation length:709 mm
Weight Iron/Al Alloy:190 Kg
Fuel Quantity:10.5 L
Speed Ratio:6.217-0.789
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

Shaanxi Fast F5J80TA MT-Manual Transmission Data Sheet

ModelF5J80TAInput Torque(N.m)800
Maximum Speed(RPM)2600Length(mm)709
Weight Iron/Al Alloy (Kg)190Oil (L) Tol. ±5%10.5

Speed Ratio of Shaanxi Fast F5J80TA MT-Manual Transmission

1st Gear6.2172nd Gear3.1493rd Gear1.752
4th Gear15th Gear0.7896th Gear /

Scopes of Supply of Shaanxi Fast Gear F5J80TA Manual Transmission

Air Intake System1.  Air Intake ManifoldStarting System1.  Starter Motor
2.  Inter-Cooler2.  Starter Rely
Exhuast System1.  Exhuast ManifoldFuel System1.  Fuel Transfer Pump
2.  Turbocharger2.  High-Pressure Fuel Pump
3.  Exhuast Elbow3.  Fuel Filter
Charging System1.  Charging AlternatorEngine Shut-Down System1.  Engine Fuel Shut-Off Solenoid
Cooling System1.  Water PumpLubricating System1.  Oil Pump
2.  Engine Fan2.  Oil Filter
3.  Standard Radiator3. N/A
Power Output System1. FlywheelEngine Auiliary Accessories1. Air Compressor
2. Standard Flywheel Housing2. Power Steering Pump
Engine Mounting System1.  Engine Mouting Bracket

Optional Accessories of Shaanxi Fast Gear F5J80TA Manual Transmission

1. Clutch Housing2. Releasing Device Assembly3. Power Take-Off
4. Twin Cone Synchronizer5. Water Cooling Device6. Air Cooling and Emergency Steering Assistance
7. Coupler Booster8. Shift Booster9. Gear Selection Booster

Modifiable Components  of Shaanxi Fast Gear F5J80TA Manual Transmission

1. Helical Teeth2. Straight Teeth3. Lubricating Oil Pump
4. Gear Shot Blasting5. Smoothing

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team

Marine Sales - Mrs. Gazit Wong WhatApp-Icon

Train Sales - Mrs. Gazit Wong WhatApp-Icon

Automotive Sales - Mr. Wells Luo WhatApp-Icon

Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

Generator Sales - Mrs. Erica WhatApp-Icon

Pump Sales - Mrs. Ryen WhatApp-Icon

Spare Parts - Mrs. Nora Chen WhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Ventas españolas - Victoria

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Contact EMAC Now!

8 + 2 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest